Get your party on & manage your scraps



Stamps: Headline Alphabet (PTI)

Ink: Onyx Black (Versafine)

Dies: Balloons (PS); Headline Alpha (PTI)

Other: Diamond Stickles (Ranger); Anita's 3D Gloss

Pheww.  This has required some patience!  The PARTY is 5 layers thick & after cutting I had to adhere them all very carefully.  Then applied gloss.  Waited for gloss to dry.  When dry, realised had applied gloss too thick & it was as wrinkly as... a wrinkly thing.  Applied Diamond Stickles to hide the wrinkles (wish that worked on me!).  Waited for stickles to dry.  Not quite long enough.  Smudged stickles, had to re-apply.  When stickles dry, put on more gloss.  Back in the airing cupboard.  Finally finish the card & take a picture, you can barely see the glitter, & the gloss is invisible.  But it looks great IRL, pinkie promise!

 

It is almost a reverse of the Muse card - bold black letters with a splash of colour.

 

Linking to:
The Card Concept: Challenge #6 - Create a Birthday Card
Less is More: Week 164 ~ Use 3 of Something
Papertrey Ink: March 2014 Blog Hop Challenge (not until 25th)
Muse Card Club: Muse Challenge #59
Simon Says Stamp Wednesday Challenge: Simon Says Glitter It

No new sheets of cardstock were harmed during the production of the above card.  All the die-cuts were cut from scrap.  Tiny pieces that should perhaps have gone in the bin.  But they were saved thanks to my new scrap management system:

 



 

 A swing file box that sits neatly on my desk, made from a few old boxes, paper & bamboo skewers.  I have another one the same for all my neutral scraps.  They work a treat - my desk has never been tidier.

Birthday card storage

So, you've made a whole lot of cards.  Where do you keep them?  In a cat food box of course!

Box covered in Kraft wrapping paper, lined with Amore by Shabby Princess.

Calendar pages were made using another pattern from the same collection, with a table created using MS Publisher.  Dividers are Kraft card from www.annamariedesigns.com.

More desk-top storage

How to turn a smoothie box into something pretty & useful.

I needed some storage for my small Papertrey Ink stamp collection, so had a quick rummage through the recycling box.  This smoothie box was just the right size to fit a few cd cases in.

To begin with, draw an angled line on one side of the box.

Then carefully undo the box so it lies flat.  This line will be one edge of the finished item, so cut as straight as possible.  I used a guillotine.  Keep the piece you cut off & use this as a template for the diagonal cut on the other side.

When both diagonals have been cut, re-assemble the box.  The front & back ends will be a bit uneven & need a little more work before the box can be covered.

First, measure the width of the box. Cut a strip of card (cereal box is ideal) to that width, & mark off the height needed at the back. Cut to size & repeat at the front. Stick these well to the outside of the box. This gives strength as well as neat edges.

Inside the box, there will be a difference in the number of cardboard layers, which could lead to problems when lining. This is easily rectified by cutting pieces from the discarded box top & sticking them in the right places inside the front & back.

Now cut pieces of card to fit the 4 inside faces, using the box itself as a template. It is best to cut something slightly larger & gradually trim tiny amounts off until it is a snug fit. If you cut off too much, there will be gaps in the lining.

In addition to the 4 pieces shown, you will also need a bottom piece. These can now be covered in the paper of your choice.

A little care may be needed when lining up the patter. The paper I chose for the lining has a grid pattern on it, so I had to make sure that all my pieces were in line with the grid before cutting.

This box is relatively small & can be covered by 2 pieces of A4 paper. By using a design that is easy to match up & you can make 1 long piece by sticking the 2 together at an appropriate place in the pattern.

Use this to cover the outside of the box, ensuring that there are no joins on the front of the box.  Having folded this down over each edge & stuck down the folds, stick in the previously covered lining pieces. 

I find that double-side tape is best for covering the all the cardboard, or a glue stick.  I think wet glue may wrinkle the paper & would take too long to dry.

Ta daah!

Paper used is from a digital pack by Crystal Wilkerson, Orange Soda, a HUGE collection of patterns currently only $1.  There is a luscious range of colours & I have succumbed to more than one!

Hope this makes sense.  If you have any questions, leave a comment & I'll try to help if i can.

How many uses for a cat food box?

We have an elderly cat who is eating us out of house & home.  He is constantly crying for food.  We get through about 6 pouches a day.  That's more than 3 boxes a week.

Ergo, we have a lot of cat food boxes in the recycling.  Always.  So I have begun to appropriate them for my crafting.  It started when I needed a small box to display my cards for sale, but it seems their uses are endless.

Today's CFB (cat food box) was transformed from this:

to this:

a handy box for all my adhesives, sticky pads etc.

The exterior is wrapped in my favourite Kraft paper.  It takes a long piece to get all the way round, so wrapping paper is best.  Inside, I made simple panels using cereal box card & covered them in gingham paper downloaded from Activity Village.  Getting the panels to fit is quite time consuming & involves a bit of trial & error, but it does become easier with practise.  A simple band of gingham & a co-ordinating label ties it all together.